ECS Home Page  

European Cycle Specialties
714-791-8900
ecsducati@aol.com
 

When searching using our site, it is best to enter the part number of the item your looking for without any puncation, spaces or dashes. Leaving the last letters off of Ducati part numbers will show other colors or possible supersession's. You can also search for keywords like: Ducati, Aprilia, Monster, ST2, 748. 998, decal, filter, lever, fairing, hat, or shirt.


Main Entrance   |   View Shopping Cart   |   Place Order   |   Help

Aprilia Parts | Aquarium supplies | Billet | Books | Brakes | Cagiva Husqvarna MV | Carbon Fiber Parts | Clothing | Decals | Ducati parts | Exhaust | Gloves | MZ | Misc | Patchs | Performance Parts | Pins | Posters | Tools | Used parts | so

Part 40-916WS - "ECS Rear Work Stand for 748, 916 996 998 & MH900E Ducatis"
"ECS 40-916WS Rear Work Stand for 748, 916, 996, 998 & MH900E Ducatis. Quickly and easily lift your bike for maintance! Bearing pivot allows easy chain care.
With an easy pin change, it will fit most single-sided swingarm bikes. (Shown @ center top)"40-916WS
Price: $165.00
1 item(s) in stock
Select a Color
Enter quantity
to cart

 

Part 40-4VSK - 7mm Valve Shim Kit for Ducati 2, 3 & 4 valve Desmo's
Save your valuable time and frustration- no running around trying to find the shims that you need. Saves over 50% off the price of factory shims! Works on 2, 3 & 4-valve Ducati's with 7mm valves, Including 748,749,848, 851,888, 916, 996, 998, 999, 1098 Monster S4,S4R, ST3, ST4, ST4S and all 2007 and newer 2 valve motors. The only exceptions are the 749S, 749R, 996S, 996R, 999R, 1098R. Comes with shim measuring tool. Small kit has 36 shims, Large kit has 52 shims. Click here for more information 4 Valve Shim Kit40-2vsk
Price: $339.00 Sale Price: $299.00
5 item(s) in stock
Select a Size
Enter quantity
to cart

 

Part 40-2VSK - 8mm 2 Valve Shim Kit for most Ducati 2valve Desmo's
Save your valuable time and frustration- no running around trying to find the shim that you need. Saves over 50% off the price of factory shims! Works on most 2-valve Ducati's, Including 620S,750SS,900SS, 620,750, 800 900 Monster, ST2 and early bevel drive Ducati's. The 1000DS Multistrada, Hypermotard and 2007 & newer models require the 7mm kit. Comes with a easy to use shim measuring tool. Click here for more information ECS 2Valve Shim Kit40-2vsk
Price: $299.00
5 item(s) in stock
Enter quantity
to cart

 

Part 40-CT - Crank shaft turning tool
ECS Crank Turning Tool. Makes turning the motor over while adjusting your valves a snap. Save time adjusting valves and degreeing cam shafts.
Price: $59.95

We are sorry, this item has sold out.


 

Part 40-WS 999 - ECS 749/999 Work Stand 40-WS 999
Great for cleaning and maintaince tasks on your Ducati 749 or 999. Quick and easy to use! Adjusts from 8.75" to 13" width.
Support pads may be replaced to Fit most 2-sided swingarm bikes including Ducati 750/900SS,
851/888, M750/M900 Monster S4 as well as Laverda 668, 750S."
Price: $109.95 Sale Price: $99.95

We are sorry, this item has sold out.


 

Part 40-FWS - ECS Front Work Stand
"Great for cleaning and maintaince.
Quick and easy to use! Adjustable Height.
Comes with 17mm pin which fits all Ducatis
Other pin sizes available.
Fits most bikes with hole in steering stem, including
Ducati 750/900SS, 851/888, M750/M900"
Price: $145.00
1 item(s) in stock
Select a Color
Enter quantity
to cart

 

Part 40-FWS2 - ECS Front Work Stand
"Shown at right. Great for cleaning and maintaince.
Quick and easy to use!
Fits most bikes with holes in bottom of fork legs including Ducati 750/900SS,
851/888, M750/M900, 748/916/996, as well as Laverda 668, 750S."
Price: $137.95
1 item(s) in stock
Select a Color
Enter quantity
to cart

 

Part 40-601 - ECS Ride Height Tool for 748, 916 & 996 Ducatis 40-601
"Use to acurately set up the suspension on your Ducati like the race teams do. Mounts with delrin pins to existing holes in the frame and axil. Simple acurate measurments. At a fraction of the cost, it won't scratch your frame like the factory ones! Instructions"
Price: $119.50

We are sorry, this item has sold out.


 

Part 40-WS Spool - ECS Spool Type Work Stand 40-WS Spool
Great for cleaning and maintaince of your Aprilia RSV 1000. Quick and easy to use!
Fits most 2-sided swingarm bikes With spools. Spools are also available separately for $10.00 A pair, if you need them for your bike.
Price: $109.95 Sale Price: $99.95

We are sorry, this item has sold out.


 

Part 40-600 - ECS Valve Shim Tool Kit for Ducati Desmo's
"Use to acurately set and adjust your own valves.
Kit includes our shim tool which replaces 4 Ducati factory tools, plus includes a micrometer and dial Caliper. Saves time and money! Works on all 2-valve and 4-valve Ducati's, Including 750SS/900SS, m600/750/900 Monster S4, ST2, ST4S 748/851/888/916/955/996/998, MH900E and early bevel drive Ducati's."40-600
Price: $75.95

We are sorry, this item has sold out.


 

Part 40-ST - ECS Valve Shim Tool for Ducati Desmo's
"Makes measuring the closing shims easy on both 2 valve and 4 valve Desmo Ducati's easy. Save $60.00 over the 4 Ducati factory tools required for the same jobs! Saves time and money! Works on all 2-valve and 4-valve Ducati's, Including 750SS/900SS, 750&900 Monster S4, ST2/ST4, 851/888, 748/916/955/996/998 and early bevel drive Ducati's. Also available as part of our Shim Tool Kit #40-600."40-ST
Price: $23.95

We are sorry, this item has sold out.


 

Part 40-WS - ECS Work Stand
"Shown at far left. Great for cleaning and maintaince.
Quick and easy to use! Adjusts from 8.75"" to 13"" width
Fits most 2-sided swingarm bikes including Ducati 750/900SS,
851/888, M750/M900 Monster S4 as well as Laverda 668, 750S."
Price: $109.95
1 item(s) in stock
Select a Color
Enter quantity
to cart

 

Part 40-602 - Front Axle Removal tool
"Save your axle! Use this handy simple tool to drive your front axle out with out damaging the treads or end of the axle. Use on Ducati 748S, 916, 996S/SPS MH900E, ST2, ST4, ST4S 1999-02 750SS/900SS and 2000-02 Monster 750/900S/S4."
Price: $19.95

We are sorry, this item has sold out.


 

Part TORX-1 - Torx bit set
"Torx bit set to fit most screw drivers with changable hex bits. Sizes T5,6,7,8,9,10,15."
Price: $15.95

We are sorry, this item has sold out.


 

Please call or email if you can't find what you're looking for.
Shipping may be higher and verification of Credit Card may be needed on International orders. We will email with details if need be.